Linksys Velop firmware

Facing Linksys Velop Red Light Issue? Let's Get That Fixed!

Linksys Velop is a mesh WiFi system that provides the user with a wonderful internet experience throughout the house. But, it won't remain for long if the Linksys Velop is flashing red. Sounds annoying? No worries! We've got you covered. In this post, we will provide you with a list of various hacks to help you fix the Linksys Velop red light issue. So, let's get started.

Fixed: Linksys Velop Red Light Issue

The Linksys Velop red light issue might occur due to plenty of reasons. But, whatever the reason might be, the following hacks will help your Linksys Velop tri-band router come back to its normal working state.

Reboot Your Linksys Velop Router

Technical glitches are the primary reason that might force your Linksys Velop tri-band router to flash red. The best way to get rid of these glitches is by rebooting your WiFi device.

Rebooting the Linksys Velop tri-band mesh router is quite easy. Just walk through the below-mentioned instructions:

  • Unplug your Velop tri-band router from the electrical outlet.
  • Let your wireless device rest for some time.
  • Plug your Linksys Velop router back into the electrical outlet.

Are you still seeing the red light on your Linksys Velop router? Fret not! We've got more troubleshooting tactics on our list.

Bring Your WiFi Devices Closer

Chances are that you're facing the Linksys Velop red light issue due to too much distance between your router and the existing modem. If that is the case, then you need to bring both devices closer. However, placing them too close might bring you bad luck because it can result in a clash of their WiFi signals. Therefore, maintaining a safe distance is of utmost importance.

Just in case there is a wired connection between your devices, ensure that the cable you've used is not worn-out. If it is, you know that it is time to get a new Ethernet cable.

Perform Linksys Velop Firmware Update

Keeping the Linksys Velop tri-band router up-to-date is one of the most crucial elements of streamlining its performance. But, it looks like you acted carelessly and ignored updating the firmware of your device. So, in order to get rid of the Linksys Velop red light issue, log in to your WiFi device and update it immediately.

Here's how to login to Linksys router and update its firmware:

  • Ensure that there is a precise connection between your Linksys Velop router and modem.
  • Once ensured, switch on your PC and launch a web browser of your preference.
  • Go to the address bar and type the Velop router's default web address.
  • Press the Enter key.
  • When welcomed by the Linksys router login page, enter the required details and click Log In.
  • You will reach the Linksys Velop dashboard.
  • Now, click Router Settings > Connectivity > Check for Updates.
  • You will be notified if a new firmware update is available for your Linksys Velop device.
  • If a new firmware update is available for your Velop device, click Upgrade.
  • Wait patiently and let your Velop router get updated.

In this manner, you can update your Linksys Velop router. In case you are unable to perform Linksys Velop firmware update, ping our experts right now.

Contact Your ISP

Perhaps, there are some issues from the end of your ISP or he's performing maintenance on the network. To confirm this, simply contact your ISP and ask him if there is any problem with the network from his end. Just in case he agrees, give him some time to get the issue fixed.

On the off chance, your ISP is not the one at fault, then there is a high possibility that you are facing the Linksys Velop red light issue due to the device's incorrect placement.

Change the Router's Location

Relocating the device is another hack that will help you fix the problem you are currently facing. All you need to do is, place your Linksys Velop router away from devices radiating electromagnetic waves.

Apart from that, avoid placing your Linksys Velop device in corners or near thick concrete walls, reflexive surfaces, metal doors, and objects carrying a large quantity of water.


After following the hacks discussed above, you will surely be able to resolve the Linksys Velop red light issue. Hundred to one-shots, if you are still stuck with the issue, reset your Velop router and set it up from scratch. If you don't know how to setup Linksys Velop router, get in touch with our experts.

Disclaimer: is an independent online technical support provider for various Linksys Velop related issues. Use of names/trademarks/logos (If any) is only for referential purposes and does not imply any kind of affiliation between and the trademark holder. The services we offer are also available on the website of the brand owner. We strongly recommend you get in touch with the manufacturer to know if your device is under warranty or not.